5 Things You Need to Know Before You Get Your Hard Drive Data Recovered

If you’ve lost data due to a hard drive failure, it’s important to know what to do to get it back. In this article, we will outline the five most important things you need to know before you start the data recovery process.

By following these steps, you will increase your chances of recovering your data in a timely and safe manner.

Make Sure Your Hard Drive is Dead

Before you can begin the hard drive data recovery near me process, you must make sure that your hard drive is dead. Unfortunately, most hard drive failures don’t result in physical damage to the drive itself. Instead, the problem is usually one or more bad sectors on the hard drive’s magnetic platter. 

Bad sectors are often the result of data errors or physical damage to the hard drive’s head, platter, or PCB. When you start a hard drive data recovery process, we always make sure that the drive is in a state where it won’t be able to read any data from the platters.

Data recovery experts can use special tools and software to determine the exact condition of the hard drive’s sectors.  If it’s possible that a bad sector could have been the cause of your data loss, you must use specialized software to test the drive. This software is designed to read and write data to the drive while watching the sectors to make sure they’re in proper condition.

If the data recovery software determines that a bad sector was the cause of your data loss, then you’ll know that it’s possible to recover your data.

Erase Your Hard Drive

After you’ve confirmed that your hard drive is indeed dead, you should erase the hard drive and start over with a new drive. This is because it’s possible that a bad sector on the old drive could have caused your data loss.

If a bad sector has corrupted part of your drive’s data, then it will be easy for data recovery software to spot the error. However, if the drive has been erased, the bad sector will be hidden from the data recovery software. 

If your drive has only a single function (like a hard drive that stores your computer’s operating system), you should also erase any data on the drive that you don’t need. This will prevent your data from being corrupted during the data recovery process.

Test the Hard Drive

When you get your data back, you’ll probably want to make sure that it’s accurate and error-free. This is where a quick test of your hard drive comes in handy. Test the drive using a program designed to check the condition of hard drives.

This will ensure that the data you get back is accurate and error-free.  In some cases, it’s possible that you might not get any data back at all. This could be the case if your old drive has been erased or if the data recovery software has determined that there’s nothing left on the drive.

In this case, you’ll have to decide whether you want to replace the drive or do second data recovery.

Don’t Restart Your Computer Until You’re 100% Sure

When you get your data back, you must make sure that you don’t restart your computer. Restarting the computer could cause the data recovery software to conclude that there’s nothing left on the drive. While this is possible, there are other reasons why the computer could be restarted. 

For example, the data recovery software could determine that the computer was restarted for other reasons (like a power outage) and conclude that your data is gone. 

Restarting the computer could also cause the hard drive’s heads to “stick”, which is a common problem with older hard drives. In this case, recovering the data could be impossible. 

If you’re not 100% sure that your computer shouldn’t be restarted, then make sure you write down when your data was last accessed. This will allow you to narrow down the time of the last access to a specific date and time.

Do the Data Recovery

If you’ve erased the hard drive and tested the condition of the hard drive, then you should do a data recovery as soon as possible. The faster you do the recovery, the less time there is for the data on your drive to be corrupted.  If you’ve made it to this step, then it’s safe to restart your computer.

However, before you do, we recommend that you completely power down your computer. This will prevent the hard drive from being damaged in any way.  When you restart your computer, immediately open the log file that you’ve been keeping.

This will let you know when the data recovery software starts reading the hard drive. Wait until the data recovery is finished, then power off your computer. Then, as soon as you know your data recovery is finished, immediately power off your computer.

This will prevent your data from being corrupted by the computer’s power.  Now it’s time to move on to the actual data recovery process. You’ll need to do a few things to ensure that your data is safe during the recovery process.

First, make sure that the drive is securely mounted to prevent it from being moved around during the recovery. Second, make sure that the computer isn’t turned on when the hard drive is being mounted.

Final Words

No matter how many times you’ve been told not to lose data on your hard drive, it can happen to anyone. The good news is that it’s very easy to get your data back. As long as you follow the five steps outlined above, you can be confident that your data will be returned to you.